Shimano SM-EC79, Manual

Page: 14 / 14

Changing the shifting switch direction
14
During this mode, press the shifting switch
that you would like to use for shifting
gears toward the outside.
Depending on the input, the outside
indication will change according to the
following pattern.
The directions of the shifting switches will
change and their status will be displayed.
5.
Press and hold the SM-EW79A adjustment mode button
to confirm the changed setting.
If an error occurs, the battery indicator will become red
and the mode will be canceled. When the new setting is
confirmed, both adjustment LEDs will illuminate for 2
seconds and will then turn off.
If an error occurs, the battery LED will change from
green to red and then turn off. If this happens, press the ENTER
switch once more to change the setting.
After the change has been confirmed, press the ST-7970 lever
switches and check that the switch directions (direction of
movement of the derailleur) has been changed. If you cancel the direction change
mode without confirming the new setting, the previous setting will be retained.
* If no operation is carried out for one minute, the mode will be canceled
automatically. It is necessary to press the adjustment button as described above in
order to save the changed direction. If it is not pressed, the new setting will not be
saved.
Outside
direction Outside
direction
Outside
direction
Outside
direction
Outside
direction
Outside
direction
Press
Press Press
Press
Press
Press
Press
Press
L R L R
L R L R
Changing
right
Changing
right
Changing left Changing left
Inside
direction Inside
direction