11
Installation/removal
Installing the battery
3.
Connect the electric wire to the battery.
Be sure to push it in firmly with the TL-EW300 until you feel a click.
Center E-TUBE port (always
have an electric wire
connected during use)
Dummy plug
E-TUBE port
Electric wire
NOTICE
•
When using the product, be sure to connect an electric wire to the center E-TUBE
port. The product will not operate normally if nothing is connected to the center
E-TUBE port.
•
Be sure to attach the dummy plugs to any E-TUBE ports that do not have electric
wires connected to them. The product will not operate normally if the dummy
plugs are not attached.
•
If water collects inside the frame after riding in wet weather conditions or
cleaning the bicycle, drain the water and do not leave the battery submerged.
4.
Insert the seat post into the frame.
