24-hour display (type 24)
Entering the date
(1) Press the set button to enable the date display
type to be changed.
The type display will be highlighted.
(2) Press the select button, button A or button B to
select the desired display type.
• type 1: (YYYY/MM/DD)
• type 2: (DD-MMM-YY)
(3) Press the set button to confirm the display
type. The date display will be highlighted.
Next enter the date.
(4) Press the select button, button A or button B to
enter the desired value.
(5) Press the set button to confirm the value
entered.
The next field to be entered will be highlighted.
(6) Repeat steps (4) and (5) to enter all of the desired values.
(7) If you press the select button or button A, the display will change to
the next item.
30
31
(5) If you press the select button or button A, the display will change to
the next item. If you press button B, the screen will return to the
previous setting item.
Selecting the number of sprocket teeth
Check the number of sprocket teeth being used
beforehand. (For details on the applicable sprocket
tooth combinations, refer to page 50.)
(1) Press the set button to enable the number of
sprocket tooth configuration to be changed.
The number of sprocket teeth will be
highlighted.
(2) Press the select button, button A or button B to enter the desired
sprocket tooth combination.
(3) Press the set button to confirm the sprocket tooth combination
selected.
(4) If you press the select button or button A, “exit” will be selected. If you
press button B, the screen will return to the previous setting item.
(1) Press the set button to enable the time display type to be changed.
The type display will be highlighted.
(2) Press the select button, button A or button B to select the desired
display type.
• type 24: (24-hour display)
• type 12: (12-hour display)
(3) Press the set button to confirm the display type.
The time display will be highlighted.
Next enter the time.
(4) Press the select button, button A or button B to enter the desired
value.
(5) Press the set button to confirm the value entered.
The next field to be entered will be highlighted.
(6) Repeat steps (4) and (5) to enter all of the desired values.
(7) If you press the select button or button A, the display will change to
the next item. If you press button B, the screen will return to the
previous setting item.
Setting data recording
This sets whether traveling data is to be recorded
or not. If it is to be recorded, set the interval
(sampling period) for data to be extracted.
• Initial setting: OFF
(1) Press the set button to enable the data
recording setting to be changed.
The ON/OFF setting for “mode” will be highlighted.
(2) Press the select button, button A or button B to select the data
recording setting.
• mode: ON, OFF
(3) Press the set button to confirm the selected setting.
The sampling period value will be highlighted at this time.
Next set the sampling period.
Date entry (type 1)
Date entry (type 2)
Entering the time
12-hour display (type 12)
(1) Select “SYSTEM” from the Setting menu.
(2) Press the set button.
(3) The date entry screen will be displayed.
■
System settings
