MY22H03 - 22_1.0_01.10.2021
63
Assembly
5.3.3
Installing the wheel in the SUNTOUR fork
Only applies to Suntour forks with this equipment
5.3.3.1 Screw-on axle (12AH2 and 15AH2)
Only applies to Suntour forks with this equipment
Before installing the wheel, ensure that the O-ring
is in the right position on the thread piece.
1
Insert the front wheel into the fork ends.
2
Insert the axle into the hub on the drive side.
Figure 51: Inserting the axle in the direction of the arrow
3
Use a 6 mm hex key to tighten the axle using
between 8 and 10 Nm. The axle thread must
be visible.
Figure 52: Tighten the axle in the direction of the arrow
4
Insert the securing screw on the non-drive
side.
Figure 53: Pushing the quick release lever into the axle
5
Tighten the securing screw with a 5 mm hex
key using between 5 and 6 Nm.
Figure 54: Tightening the securing screw
The wheel is now fitted.
