Shimano EDISON COMP I-12 Page 219 Original Operating Instructions Download

Page: 219 / 257

MY22H03 - 22_1.0_01.10.2021

218

Troubleshooting, fault clearance and repair

9.5.4.3 Suspension too soft on inclines

The rear frame damper deflects deeply through
the deflection range Deflection is quickly used up,

the rider's weight shifts forward and the bicycle
loses some momentum.

Figure 259: Excessively soft suspension in the rear frame damper on hilly terrain

Solution

Figure 260: Suntour compression adjuster (1) on the rear
frame damper



Turn

compression adjuster

clockwise.



The damping and compression hardness is
increased and the deflection stroke speed is
reduced. Efficiency on hilly and flat terrain is
improved.

Summary of Contents for EDISON COMP I-12


































































































































































































































































Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands

Shimano EDISON COMP I-12, Original Operating Instructions

Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands