Shimano EDISON COMP I-12 Page 211 Original Operating Instructions Download

Page: 211 / 257

MY22H03 - 22_1.0_01.10.2021

210

Troubleshooting, fault clearance and repair

9.5.2.3 Suspension too soft on inclines

The fork deflects at a low point in the terrain. The
deflection is quickly used up, body weight shifts
forward and the pedelec loses some momentum.

Figure 243: Excessively soft suspension in the suspension fork on hilly terrain

Solution

Figure 244: Changing compression adjuster to a harder
setting



Turn

compression adjuster

in a clockwise

direction towards LOCK.



The damping and compression hardness are
increased and the deflection stroke speed.
Efficiency on hilly and flat terrain is improved.

Summary of Contents for EDISON COMP I-12


































































































































































































































































Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands

Shimano EDISON COMP I-12, Original Operating Instructions

Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands