12
Resetting the traveling distance
The traveling distance is reset from the main screen.
1.
On the main screen: Press <A>. (Switches the traveling data display to [DST])
2.
Hold down <A>. (Continue to hold down until the number displayed for [DST] flashes)
3.
When the number displayed for [DST] is flashing: Press <A>.
The traveling data is reset.
•
If nothing is done for five seconds after the number for [DST] begins flashing, it will stop flashing and the screen will return to the main
screen. The display will automatically return to the main screen when the start of traveling is detected.
Gear position when starting from a stop [Start mode]
The assist bicycle where this product is installed may be set to automatically switch to a gear where it is easier to start riding
again after stopping. If you want to change this setting, contact your place of purchase.
