Shimadzu GC17A/GC14C
4 Using the control module
4.1.6 Method Setup - GC - Shutdown
Fig 12: Method Setup - GC Control - Shutdown
The
Shutdown
tab of the GC control enables to switch off the oven heater
after the analysis is finished.
Keep state
- the heater remains on
Set off after Analysis
- the heater will be switched off after the end of
gradient program.
Note:
When any method is sent to GC, the heater will be always switched On.
Typically, the method with shutdown On will be used as the last one in a
sequence. The automatic sending of the method to the instrument should
then be disabled.
- 13 -