79
14. Communication with Peripheral Devices
14. Communication with Peripheral
Devices
14.1 Electronic Printer EP-80
The AUW-D/AUW/AUX/AUY series allows connection to Electronic Printer EP-80.
When using EP-80, follow these procedures for connecting to the balance.
1
Set the communication status of the balance to
F1 (standard settings 1). (See
)
2
When using a computer as well, set to timer
handshake (see
) in the user settings.
3
Turn off the power when the balance is either
“oFF” or “STAND-BY”. Then connect the printer
cable to the DATA I/O on the back of the balance.
Connect the printer cable to the printer, too.
4
Turn on the balance power.
5
Turn on the printer power.
.
Notes
• Refer to the instruction manual of EP-80.
• Continuous output cannot be made to an electronic printer.
• Electronic Printer EP-60A can also be used.
