26
1
1
Setup
Setup
Turning on the Power
1.
Insert the plug of the AC adapter into the DC IN connector on
the back of the balance.
Semi-micro models
Other models
(1) Connect the cable (provided in the
accessories) to the power supply unit.
* Insert the connector of the cable in the
power supply unit correctly, and fix the
connector with the fixed screws.
(2) Connect the plug for the AC adapter.
Insert the AC
adapter plug
into the DC IN
connector.
Cable holder is attached to the AC adaptor.
Fix the cable of the AC adaptor with cable holder to appropriate
position on the back of the balance so it does not interfere with the
glass draft shield when it is opened or closed.
2.
Connect the AC adapter to the power outlet.
A function for automatically adjusting sensitivity
Perfect Self Calibration (PSC) with the use of
internal weights. (W-AD/ W/ X Series only)
Calibration will be carried out automatically with the
use of the weights incorporated into the balance
when the AP series is started up in the default mode.
The sound of a small motor will be heard during this.
Press the [
POWER] button during Perfect Self
Calibration to halt the procedure.
^
[Adjustment and Tests with Internal Weights
(W-AD/ W/ X Series only)] (P.46)
The Y Series is not equipped with a function for
automatically adjusting sensitivity Perfect Self
Calibration (PSC) with the use of internal weights,
so PSC procedure is skilled and OFF displayed.
*
*
Press the [
POWER] button when OFF is displayed.
* When using the log-in function, select the user by
pressing the [
UP] and [
DOWN] keys to log in.
The screen shown on the
left will be displayed.
^
Software Version Verification Method
The number shown on the bottom right of the screen
(left image) which is displayed immediately after turning
the power on is the software version number. The
larger the bottom two digits are, the newer the version.
CAUTION
Initialization of the automatic door function when turning power ON (W-AD Series only)
In order to initialize the automatic door function after turning power
ON, the glass doors (top, left, right) will be fully opened then fully
closed automatically. Ensure sufficient area for the doors to open
when installing the balance before turning the power ON.
*
*
CAUTION
Precautions when turning on power supply
(W-AD Series only)
Check the following items before turning on
the power supply.
· That the glass doors (top, left, and right) and
stopper knobs are attached correctly.
· That there is no foreign matter caught in the
glass doors (top, left, and right) or front glass.
The following screen will be displayed.
When you use a verified balance as a legal measuring instrument in the EU.
When you press the [
POWER] button in the state of unstable, “---g” may be displayed.
USB DEVICE
*
*
