3
Connector Identification:
Installation
1.
Open the PC case that will be used to mount the 838-PEB
2.
If not installed, install the ATX power supply to be used
3.
Install any drives or other peripherals in their required bays
4.
Mount 838-Latching Relay Module if Used
5.
Install 838-PEB board and ensure PCB standoffs line up with mount holes
a.
If not, determine which ones need to be moved and move them to the correct
locations
6.
If using the 3D printed guide rail system only mount screws in the below identified
locations as the rail guide will mount in the other holes. If not then go ahead and
mount in all locations that line up with a PCB standoff.
Summary of Contents for 838-PEB Version 1.0
Page 1: ...http www shift838 com ...
