Plug the antenna lead into the TV antenna terminal on
the rear panel.
CONNECTING VHF AND UHF ANTENNAS
Installations
8
Antennas with 300-ohm Flat Twin Leads
Antennas with 75-ohm Round Leads
If your antenna has a set of leads that look like this,
see Antennas with 300-ohm Flat Twin Leads below.
If your antenna has one lead that looks like this, see
“Antennas with 75-ohm Round Leads” below.
If you have two antennas, see “Separate VHF and
UHF Antennas”, on page 9.
If you are using an off-air antenna antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin
flat leads, follow the directions below.
1
Place the wires from the twin leads under
the screws on a 300-75 ohm adaptor (not
supplied). Use a screwdriver to tighten the
screws.
TV
ANTENNA
TV
ANTENNA
2
Plug the adaptor into the TV antenna
terminal on the rear panel.
Please be certain that TV is unplugged from the AC outlet before making any connections.
Since different component often have different terminal names, carefully read the operating instructions of the
component connected.