17
ENJOYING SURROUND SOUND
• Each time this button is pressed, the mode changes as follows :
Auto surround mode : The optimum surround mode will be
automatically selected depending on the signal
format being input.
Manual surround mode : You can select the desired of different
surround modes selectable for the signal
being input with using the SURROUND
MODE SELECT(>/<) buttons.
*
1
: When “CENTER” and “SURR”(Surround) are set to “NO”, any surround mode cannot be selected and the source can be
reproduced either in the stereo mode or in the 2CH downmix mode.
■
Notes :
• When the SPEAKER button is set to off or “CENTER” and “SURR”(Surround) are set to “NO”, the auto surround mode is invalid.
• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum
surround mode may vary depending on whether the speaker type is set to "NO" or not.
• When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.
■
When selecting the manual surround mode with pressing the AUTO/MANUAL button on the front panel
Select the desired surround mode.
■
Note
: Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance.
(For details, refer to "SETTING THE SPEAKER SETUP" on page 42.)
Depending on how to select a surround mode, select the auto surround mode or the manual surround mode.
("AT(Auto)" indicator
lights up.)
("AT(Auto)" indicator
goes off.)
• Each time the SURROUND MODE SELECT (>/<)
buttons are pressed, the surround mode changes
depending on the input signal format as follows :
AUTO/MANUAL
SOUND
SURROUND
DOLBY DIGITAL or <2 CH IN> *
1
DOLBY PLII MOVIE, DOLBY PLII MUSIC, THEATER, MOVIE, HALL, GAME, STADIUM,
MULTI CH STEREO, DOLBY PRO LOGIC or <2 CH IN> *
1
Corresponding DTS mode or <2 CH IN>*
1
Dolby Digital EX 6.1 channel sources,
Dolby Digital 5.1 channel sources
Dolby Digital 2 channel sources,
PCM (2 channel) sources,
Analog stereo sources
DTS sources,
DTS 96/24 sources
Signal format being input
Selectable surround mode
ENGLISH
■
To cancel the surround mode for stereo operation
• Depending on the signal format which is being input, either the
stereo mode or the 2CH downmix mode is selected.
• To cancel either the stereo mode or the 2CH downmix
mode, select the surround mode with using the SURROUND
MODE SELECT(>/<) buttons.
■
2CH downmix mode
• This mode allows the multi-channel signals encoded in DTS or Dolby Digital format to be mixed down into 2 front channels and
to be reproduced through only two front speakers or through headphones.
• When the SPEAKER button is set to off to listen with headphones while playing the multi-channel digital signals from DTS or
Dolby Digital sources, it will enter the 2CH downmix mode automatically.
STEREO
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 17