ENGLISH
45
Operating the sleep timer
• The sleep timer allows the system to continue
to operate for a specified period of time before
automatically shutting off.
• To set the receiver to automatically turn off
after the specified period of time.
• Each time this button is pressed, the sleep time
changes as follows:
→
10
→
20
→
30
→
---
→
90
→
OFF
Unit : minutes
• While operating the sleep timer, "
" lights up.
• When the sleep time is selected, all display
panels of Sherwood components connected by
the DIGI LINK III are dimly lit.
Displaying the audio information
• You can check the audio information of the input source other than tuner on your monitor TV.
• During playback,
• Depending on whether the input signal is digital or
analog signal, the corresponding information is
displayed for several seconds.
Example : When playing the digital signals from the
Dolby Digital source.
• Each time this button is pressed, the
brightness of all fluorescent displays of
Sherwood components connected by the DIGI
LINK III changes together as follows:
→
ON
→
dimmer
→
OFF
• In the display OFF mode, pressing any button
will cancel the display OFF mode for several
seconds to display the operation status.
Adjusting the brightness of the
fluorescent displays
OTHER FUNCTIONS
