![Sherwood Newcastle CD-980 Operating Instructions Manual Download Page 22](http://html1.mh-extra.com/html/sherwood/newcastle-cd-980/newcastle-cd-980_operating-instructions-manual_1256426022.webp)
22
Troubleshooting Guide
If your unit should not perform as expected, consult the table below to see if the problem can be corrected
before seeking help from your dealer or our service organization.
REMEDY
Connect the cord securely.
Press the POWER button to ON.
Reload the disc with the printed side
up.
Clean the disc.
Load another disc.
Make connections correctly.
Operate the amplifier correctly.
Press the
▶
/
■■
button to cancel the
pause mode.
Make connections correctly.
Check the connections and connect
all cords securely.
Play another disc.
Place this unit on a stable surface.
Try again with a scratch-free disc.
Try again.
Check the number of the
programmed deleted selections.
PROBLEM
No power
No play
No sound
Poor or distorted sound
Sound skips
Programming or deleting
does not perform.
POSSIBLE CAUSE
The AC input cord is disconnected.
The POWER button is not pressed
correctly.
The disc is loaded upside down.
Dirty disc.
Defective or deeply scratched disc.
Incorrect connections.
Incorrect operation of the amplifier.
The "
■■
" indicator lights up.
The unit is connected to the PHONO
input jacks of the amplifier.
Poor connections.
Defective or deeply scratched disc.
This unit is placed on a surface that
is subject to vibration or physical
shock.
The disc is dirty or badly scratched.
The programming or deleting
procedure is not correct.
The number of the programmed or
deleted selections is 20.
ENGLISH
Summary of Contents for Newcastle CD-980
Page 24: ...5707 04694 005 0 ...