LAN
Internet
Modem
PC
Broadband router
E
N
G
L
IS
H
10
8.
CONNECTING FOR SYSTEM CONTROL
• Connect this jack to the DIGILINK-i jack of Sherwood
iPod dock that allows you to control the iPod with the
unit's remote control.
9.
CONNECTING TO NETWORk
When you connect this receiver to a home network, you can enjoy viewing a variety of video contents and listening to internet
radio audio that the built-in VuNow Pod delivers via broadband without the use of a personal computer (PC).
• There are two ways to connect to a home network as illustrated below :
■
Wired Connection
•
Connect the LAN connector of this receiver to your internet source.
■
Wireless Connection
•
Connect the supplied VuNow USB Wireless adapter to the USB connector and install a broadband router supporting
wireless LAN.
•
The USB memory device can be also connected to the USB connector to play video or music files, etc. or to download the
rented videos. (For details on connecting USB memory device, refer to “USB CONNECTOR” on page 12.)
■
Notes :
•
Be sure to make either wired connection or wireless connection. (You don’t need to do both.)
•
After making a broadband internet connection, you should set the communication setting. (For details, refer to “Network” on page 42.)
•
When using a broadband internet connection, a contract with an internet service provider is required. For more information, contact your
nearest internet service provider.
•
Refer to the operating instructions of the equipment because the connected equipment and connection method may differ depending on your
internet environment.
•
Use a LAN cable/router supporting 10 BASE-T/100 BASE-TX.
•
A broadband speed of 768 kbps or more is recommended.
•
Some LAN cables are easily affected by noise.
We recommend using a shielded type cable.
10.
AC INPUT CORD
• Plug this cord into a wall AC outlet.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 10