Sherwood AX-5103, Operating Instructions Manual

Page: 6 / 15

6
ENGLISH
6
ENGLISH
PHONO CD TUNER
TAPE 1
/MD
IN OUT IN OUT
TAPE 2
MONITOR
DIGI LINK
AC OUTLET
SWITCHED
230V~50Hz
100W MAX
SPEAKER A
SPEAKER B
MODEL NO. AX-5103
INTEGRATED AMPLIFIER
DESIGNED IN USA
ASSEMBLED IN KOREA
SER. NO
AC INPUT
230V~50Hz
190W
GND
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
WARNING : SHOCK HAZARD-DO NOT OPEN.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
SPEAKER IMPEDANCE
A,B - 8 MIN / SPEAKERS
A+B -16 MIN / SPEAKERS
SPEAKER A
SPEAKER B
Speaker A right Speaker A left
Speaker B right Speaker B left
CAUTION
SPEAKER IMPEDANCE
A,B - 8 MIN / SPEAKERS
A+B -16 MIN / SPEAKERS
CONNECTING SPEAKERS
Plug this cord into a wall AC outlet
AC INPUT CORD
This outlet is switched on (power on
mode) and off (standby mode) according
to power control as follows ; (Maximum
total capacity is 100 W)
This amplifier enables you to listen to two pairs of speakers individually or in
various combinations.
Connect your main speakers to the SPEAKER A terminals and use the
SPEAKER B terminals for the remote pair located elsewhere in your home.
Never short circuit the + and - speaker cords.
Be sure to connect speakers firmly and correctly according to the channel (left
and right) and the polarity (+ and -).
Note : For safe amplifier operation, use the speakers with impedance of over 8 Ω
when you use either SPEAKER A or B terminals and use the speakers
with impedance of over 16
Ω when you use both SPEAKER A and B
terminals.
Standby mode - switched AC outlet off
Power on mode - switched AC outlet on
SWITCHED AC OUTLET