IMPORTANT SAFETY INSTRUCTIONS
1.
READ ALL INSTRUCTIONS CAREFULLY BEFORE USE.
If you do not understand these instructions,
or need clarification or further explanation, please call for assistance: 01522 283 020.
2. Do not load cart with more than 350 kg.
3. Do not allow children to use the cart unsupervised. This cart is not a toy.
4. This product is not to be used transporting passengers.
5. This product is not to be used for highway use.
6. Always distribute payload evenly over surface of the bed.
7. Do not load any items on top of the panels. Lower panel when objects are to be loaded onto the cart.
8. If any parts become damaged, broken or misplaced, do not use the cart until replacement parts can be
obtained.
9. Do not operate or use on objects that can cause damage to the tires.
SAVE THESE INSTRUCTONS FOR FUTURE REFERENCE
ASSEMBLY INSTRUCTIONS
Your cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts
are missing, damaged or if you have questions or need additional instructions
DO NOT RETURN THIS
PRODUCT TO THE RETAILER,
call the Sherpa helpline on
01522 283 020.
Tools required for assembly: Medium size slot screwdriver, 6, 8, and 12mm open end spanner and /or two
medium adjustable spanners.
Refer to the exploded drawing and the parts list on the following
pages during assembly.
STEP 1
Turn the cart bed upside down
. Use the cardboard from
the carton to keep from scratching or damaging the finish.
STEP 2
Assemble the rear axle (6) to the back of the bed using (16)
8x20mm support bolts, (17) 8mm washers and (18) 8mm lock nuts.
Hand tighten. Next attach the left and right rear axle braces (7&8)
using (16) 8x20mm support bolts, (18) 8mm lock nuts, and (17) 8mm
washers.
Then
tighten all nuts securely
.
STEP 3
Attach the Front Axle Assembly (9) to the bed using
(16)
8x20mm bolts, (18) 8mm nuts and (17) 8mm washers
with the two axle guides facing inwards / towards the back of the
cart
(as shown in Figure 2)
A
. Place the steering link connector on top of the two axle guides and
attach using (19) shouldered bolts, (21) nuts and (20) washers
NB
only tighten the nuts to remove access play in the thread and
ensure free movement from side to side
B
. Secure the center front axle Support (10) to the bed of the cart
using (16) 8x20mm bolts, (18) 8mm lock nuts, and (17)
8mm washers.
Summary of Contents for SLGT2
Page 6: ......
