Page 6
Inputs and Outputs
Input sensitivity (for full output into 8 ohms):
800 mV
Analog inputs:
One stereo pair of unbalanced (RCA) inputs.
Analog (line level) outputs:
One stereo pair of unbalanced (RCA) outputs .
Speaker outputs:
8 pairs of full-sized five-way binding posts
(one pair for each channel in each zone; Channel 1, zones 1-4 and Channel 2, zones 1-4).
Minimum recommended load impedance (per channel):
ANY
combination that totals 2 ohms or higher per channel.
Trigger and control:
Trigger Input (mono 1/8”).
Trigger Output (mono 1/8”).
Front panel controls and indicators:
On/Off (large push button); toggles Standby mode.
On/Off LED (1); red indicates Standby mode; blue indicates normal operation;
flashing red indicates a fault.
Zone Enable (4 pushbuttons); 1 through 4; individually enable each zone.
Zone Status; LEDs (4); indicate when each zone is enabled.
Volume (knob).
Rear panel controls and indicators:
Power (rocker switch); switches mains power.
Input Voltage (protected slide switch); selects 115 or 230 VAC line voltage.
Master Volume; controls the level of the input .
AC power input:
IEC standard C13/C14 inlet and power cord (two conductor).
