7
Fig. 6 Optional Rack Panel assembly
Note 1
- Remove two M4 flat head screws from front panel of amplifier and use them to fasten the amplifier
to the Rack Panel as shown above. The amplifier front panel is not removed.
Note 2
- Fasten the Alignment Bar (when two amplifiers are used) to the bottom cover of the amplifier using
the two screws already in place. This will hold the back of the amplifiers in alignment.
Note 3
- When only one amplifier is mounted to the Rack Panel, the second opening can be covered with a
Cover Plate that is not part of this kit.
Each Rack Mount Kit contains:
Item
Qty
Name
To Mount
(1)
1
Rack Panel
(2)
1
Alignment Bar
(3)
4
10-32 x 1" truss head screws
Rack Panel
(4)
4
#10 shoulder washers
Rack Panel
(5)
2
existing amplifier screws
Alignment Bar
Separately available from Sherbourn:
(6)
1
Cover Plate with mounting screws
(2)
ALIGNMENT
BAR
AMPLIFIER
1
AMPLIFIER
2
(1) RACK PANEL
(6) COVER PLATE
(ORDER
SEPARATELY)
NOTE 1
NOTE 3
NOTE 2
(5) EXISTING
SCREWS
(4) #10
WASHERS
(3) 10-32 x 1
SCREWS
