Orange Pi Manual
Copy right by Shenzhen Xunlong Software Co., Ltd
www.orangepi.org
www.xunlong.tv
30
iii chmod +x etm_monitor
iv Run ./etm_monitor, there will be an activation code page like
version 1.0.32. And then binding on the Thunder remote page (above steps 4,
5). There might be one or two errors while running, ignore it (selection type
of shell and generation of INI file).
v Setting start up
sudo nano /etc/rc.loacl
add the following contents before exit 0
cd /xx/xunlei
./etm_monitor &
ctrl +o and enter, ctrl +x to save and exit.
It could be remote downloading on computer, mobile phone or tablet by
login yuancheng.xunlei.com
7) Modify the size of ext4 file system
After made the written image into SD card for booting, enter into rootfs
partition’s expansion of file system. It could enhance the performance of SD
card to avoid limited storage cause problem.
Method 1
Extend rootfs file partition of TF card on PC:
Select the specified disk, right click and select the corresponding disk, select
"change size" and adjust it into your desired size, click "re-size", close the
dialog box and click "apply all operations", select the application to
complete the expansion operation
Method 2
Enter into the system and extend via shell
Before partition
