1.Introduction
The HD BaseT 4x4 HDMI Matrix with simultaneous CAT5e/6/7 and HDMI
outputs connects four HDMI sources to eight displays. This matrix features four
HDMI outputs and each HDMI output is mirrored to provide a CAT-Cable
output which runs simultaneously.
It supports the transmission of video
(resolutions up to 1080p Full HD and 4Kx2K@30Hz) and supports high
resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby
Digital Plus and DTS-HD Master Audio
.Connect a HD BaseT Receiver to each
of the CAT-Cable outputs to extend the HDMI signal up to 328ft/100m
(100m
Version)
or 230ft/70m
(70m version)
for multi-room connectivity.
It works with
Blu-Ray players, Set-Top boxes, Home Theater PCs, and game consoles that
connect to an HDMI display. Any source is accessible at all times by any display
by selecting it
via the supplied IR Remote Control, RS-232, TCP/IP or by using
the selection buttons on the front panel. This device supports High Definition
Audio, and 3D signal compatibility.
2.Features
• HDMI1.4, HDCP 1.4 and DVI1.0 compliant
• Supports HDMI 3D pass-through
• Supports resolutions from VGA~WUXGA and HD resolutions from
480i~1080p~4Kx2K@30 dependent upon the EDID settings
• Supports transmission distances up to 328ft/100m
(100m Version)
or
230ft/70m
(70m version)
through CAT5e/6/7 cable
• Support POE fuction
• Supports simultaneous HDMI and CAT outputs
• Supports wideband IR(30-60Khz) matrix system, IR transport channel can be
forward or backward
• Supports RS-232, remote control, on-panel control and TCP/IP Control
• Supports smart EDID management
Ver1.0 Page 2 of 20
