Orange Pi Plus User Manual Shenzhen Xunlong Software CO., Limited
www.orangepi.org
www.xunlong.tv
Hardware connect physical map-bottom view
1. Insert the written-image TF card into the TF card slot on the left
edge of the upside of the board.
2. On the bottom edge in the middle of the board is the HDMI Type A
(Full sized) port, just on the right of the SATA port. Just connect
any HDMI Type A cable from the board to your TV or HDMI
Monitor.
If you don't have a TV/Monitor with a HDMI or DVI-D port you
can use the AV jack located on the very right of the bottom edge.
3. Plug a USB keyboard and mouse into the USB slots located on the
right edge.
