network of the name and security Settings.
4. Touch one of the WLAN network to connection. When you select open network, , Tablet
PC will be connected to the network. If selected is WEP, WPA/WPA2 encryption network,
it must first corresponding input password, and then the touch connection
Connect to other WLAN networks
1. Wireless and network on the screen, touch the WLAN settings. Find WLAN networks
will be displayed in the WLAN network list.
2. Touch other WLAN networks can be connected to the network.
NOTICE:
In addition, the Tablet PC via GPRS Internet. GPRS SIM card in our current
default boot is open, the user can manually select the specific location in "Settings -> SIM
management -
> Data connection, touch “Data connection” to close the current SIM card
data connection.
Bluetooth
Turn on Bluetooth or set the Tablet PC can be detected
1. Press the Home key, click on
Setting
2. Click on “Wireless & networks”, Then Select “Bluetooth” check box, to open Bluetooth.
The Tablet PC will automatically scan can be used a wireless network. After open, the
status bar will appear Bluetooth (). Touch the "Scan for devices" will begin to scan for
Bluetooth devices within range.
3. Touch Bluetooth Settings, All the equipment will show up in Bluetooth devices list
below.
(Select the check box can be detected, the Tablet PC is set to be detected, so that within
the scope of other Bluetooth devices can find the Tablet PC.)
Important: cell Tablet PCs can detect the longest time for two minutes.
Matching and connecting Bluetooth headset
1. Press the Home key, click on
Setting
.
2. Click on “Wireless & networks” -> Bluetooth Settings, Then Select Bluetooth check box,
to open Bluetooth. Then your Tablet PC to scan within the scope of the Bluetooth, and will
all find to device display in Bluetooth device list below.
Equipment found below in the list of Bluetooth devices.
Interrupt and the Bluetooth headset connection
1. Press the Home key, click on
Setting
-> Bluetooth Settings.
2. In the list of Bluetooth devices, touch or tap and hold hands-free headset is connected.
3. Long press and select “Disconnect & un pair”.
Charge the Fingerprint Tablet PC
Before using the device for the first time, you must charge the battery.
1
.
You can charge the device with a travel adapter or by connecting the device to a PC with a
USB cable.
2
.
Battery full icon is shown when finished if your device is off.
Notes
:
1. Use only qualified factory supplied chargers and cables. The use of unapproved accessories
could damage your Tablet PC or cause the battery to explode.