Operation instruction
6
1)
Debug port:
for firmware
update.(See default set for update)
2)
LED Indicators:
①
Power
–
The PWR LED indicates that power is available to the unit.
②
Mode
–
The FW LED indicates that firmware has been loaded and the system is running.
③
Link
–
The LINK LED indicates that an HDBaseT link connection has been established between the two
boards over the Cat5e cable.
④
HDCP
a. When the HDCP LED is on, it indicates that video content with HDCP protection is being transferred.
b. When the HDCP LED is blinking, it indicates that video content without HDCP protection is being
transferred.
c. When the HDCP LED is off, it indicates that no video is being transferred.
3)
IR Receiver Window.
4)
RS232
–
This connector is used to deliver RS232 traffic (up to 115200 bps) over the HDBaseT link.
5)
IR-TX port - This jack can be used for connecting Tx blaster cables.
Receiver Panel
6)
Double USB ports (type A) -
This USB port on the sink board connects to the USB devices or salave (i.e.,
mouse, keyboard).
7)
Ethernet port
–
There is one standard Ethernet port.
8)
HDMI Input port
9)
HDBaseT port- Connect a Cat5e /6 cable between transmitter and receiver.
10) DC input port- The 48V DC is the power input for the receiver
if power adapter connects with the transmitter, the transmitter is a PSD, the receiver is a PD.
if power adapter connects with the receiver, the receiver is a PSD, the transmitter is a PD).
To avoid the unit being damaged, DO NOT connect power supply for both of transmitter and receiver.
