CHD-6
User Manualt
8
CHD-6
User Manualt
9
5.2.10 Advertisement Setup
There are two ways of showing advertisement in this
player:
-Playback by number of advertisement: when the set
amount of advertisement being played, the system will stop
the advertisement playback.
-Playback by time: when advertisement been played for
the set amount of time, the system will stop the advertisement
playback when the last one is finished.
To setup these playback modes, you will need to use
the advertisement setup program that comes with the player,
please refer to additional information <Advertisement
playback configuration editor instruction> for details.
. Troubleshooting
Question 1: Why the player plays the next file when
the first file is not finish, when there is no command being
assign?
Answer:
1. Please make sure you are not using scan disk mode or
scan disk mode;
2. Please make sure advertisement is off.
Question 2: When I try to disconnect the USB
connection, the “The device “CHD-6” cannot be stopped right
now. Try stopping the device again later.” message keeps
appear, what should I do?
Answer:
Close the programs that might access CHD-6, include
Windows Explorer, if still unable to disconnect, close down
all the programs and wait for 20 seconds then try again. If still
unable to disconnect the connection, turn off your computer
and disconnect the USB connection.
Question 3: When I select d3 and press the OK button or
the PLAY/PAUSE button in the virtual disk interface, why the
player playback files in d1?
Answer:
This is because there are no files in d3~d6, but d1
contains some files; you choose d3, in normal case, the player
will play files in d3 then move on to the next disk, when it
finishes playing files in d6, it will start again from d1.
