8 Port /16 Port User Manual
-
13
-
LED OSD Configuration
The LED OSD allows you to set up and configure the LED display.
Buttons
Functions
MENU SELECT
Press this button invokes the menu function
and brings up the main menu.
EXIT/AUTO
Press this button exits the current menu and
return to the previous menu or press this
button exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Press this button moves your menu to make
corresponding adjustment.
LED state
Green :running
Red :power off or access non standard VESA
signal
Flash green
：
energy saving mode or no
signal
Table 3-1.2 LED OSD configuration instruction
Press AUTO if the screen migrates after power on or under other
circumstances, then the screen auto configure to its best display state
.(It might can’t
be adjusted to its best state if part of the display mode is not standard VESA mode, if
so return back to OSD menu to RESET, then it will back to normal.
We suggest our customers to set up the display mode at 1280x1024, refresh
rate at 60Hz.
