Shenzhen IME Technologies 2.0C Series, User Manual, Page: 13 / 19

- 11 -
6. Open this document “GPRS.DAT” with “Microsoft Word”, edit the email accounts, phone
numbers, and all the other settings;
User can check MMS information of local mobile operator from following website:
http://www.activexperts.com/xmstoolkit/mmsclist/
MMSC=URL; Provider APN=APN; WAP=IP; Gateway=Port
Correct Correct Correct Correct Setting Setting Setting Setting example example example example
URL=mmsc.monternet.com
APN=cmwap
IP=10.0.0.172
Port=8080
Tel1=
Tel2=
Tel3=
Tel4=
Email1=
Email2=
Email3=
Email4=
Note: "http://" and any symbol in the end should be cut off; i.e.: WAP=http://10.0.0.172:
Correct IP=WAP=10.0.0.172___(no http://, no last symbol---colon :::: )
7. After you type in all the numbers and letters, you can take off the SD card and insert it into
huntingcam, all the information you set with computer will also automatically saved into
camera.
8. After user turn on GPRS mode, user can press button “Left” to search for GPRS signal.
Button "Right" to test photo-sending.
5.
5. 5.
5. Comprehensive
Comprehensive Comprehensive
Comprehensive D
D D
Description
escription escription
escription of
of of
of IIIInfrared
nfrared nfrared
nfrared C
C C
Cameras
ameras ameras
ameras F
F F
Feature
eature eature
eaturessss
5.1 5.1 5.1 5.1 IR IR IR IR intelligent intelligent intelligent intelligent monitoring monitoring monitoring monitoring surveillance surveillance surveillance surveillance
When you initiate the IR monitoring function, because of default setting, you’ll get 5s
waiting time to prepare or install camera. PIR will start once the green light is off.
Due to the sensitive characteristic of PIR which is especially sensitive to near-by floating
objects, please do not have any floating objects like leaves, strings, or ribbons within the 3M
motion detection zone when you install camera, to avoid mistaken photographs or videos.
The photograph and video function will automatically start once the motion detector found
any moving object get in the monitoring zone. Meanwhile, various default settings will be
initiated, camera will run according to the settings of system.