3. Other Functions
3.1 After Startup
Open the H101 presenter to show the remaining time of alarm timer. If the timer is not
set, "0" will be displayed. When displaying "
" and flashing for three seconds it means the
voltage of the battery is low. Battery needs to be replaced.
A vibration of motor means wireless is connected with receiver after turn-on. If no motor vibration,
please check whether the receiver is properly plugged into the USB port of the computer.
3.2 Wireless Repair
If H101 presenter cannot connect to receiver (receiver is plugged, but the presenter doesn’t work), you can
try to repair it with the receiver in the follow steps:
1) Press and hold the key① + key②, and then turn on the presenter. If “
“ is displayed means the presenter
is in repair mode.
2) Plugging in USB receiver and then turn on the H101 presenter, press and hold the key③ and move it close to
the receiver (in 20cm). The repair is successful if the spotlight scene mode can be entered.