16
15
REMOTE CONTROL
REMOTE CONTROL
Function Description
NOTE:
1. The remote control should not be near overheated or humid places,and should not be exposed to direct
sunlight or strong light.
2. Do not subject the remote control to strong collisions or fall from a high place, otherwise it will damage
the remote control and make it impossible normal work.
3. Please use CR2032 button batteries; do not mix new and old button batteries or different types of button
batteries.
4. When the remote control is not used for a long time, please take out the battery and do not throw the
battery into the fire.
5. If the battery bursts, please clean and wipe the battery compartment dry, and then install a new battery.
6. Under normal use, replace the battery every 6 months.
GAIN
The user can choose the 0dB or -8dB gear according to the output level of the audio source;
when the output level of the audio source is too high, please select the -8dB gear
(
the GAIN light on
the corresponding panel is on
)
.
1
MUTE
Press this key once to stop the signal output; press this key again to resume signal output.
2
XLR 1
、
XLR 2
、
RCA 3
、
RCA 4
、
RCA 5
、
RCA 6
Signal input selection button:
Corresponding to the panel S1/USB,S2/OPTICAL,S3/COAXIAL,S4,S5,S6 gears.
3
▲
VOLUME
▼
Press this key to control the volume; "
▲
" to increase the volume, and "
▼
" to decrease the volume.
4
Introducing the battery box
Insert the battery box
Insert the coin cell battery into
the battery box,
(
positive
)
pole
up;
(
negative
)
pole down
1
2
3
Preparation
Remote
Control
Remote Control
Receiving
Use Operation
The effective distance of the remote control is about
7 meters.
The receiving angle of the remote control is within 30
degrees.
Do not place the remote control sensor of the machine
under direct sunlight or strong light; this will cause the
remote control to fail to operate.
4
3
2
1