Shenchen Pump LabV Series
- 7 -
Click the
Setting
button in the main interface, then click
Suck-Back
button to enter
the back suction angle setting interface. Click
angle
button, enter suck-back angle
then click
ENT
. This can set all suck-back angle when motor stop running, except
dispensing
is
ON
.
6. External Setting Interface:
External Setting Interface as below:
OK
External control signal
Ext.Start/Stop
Ext.CW/CCW
Foot switch setting
Click
Setting
button in the main interface, then click
External control
to enter
External Settings
interface.
A. External control of the motor start-stop and reserving signal is divided into two
kinds : level mode and pulse mode, Specific interface, see details in describes
