STEP #2
– Leg Assembly
•
Carefully lay the table upside down on a cushioned surface (carpeting, blanket, etc.) to prevent
damaging the cabinet laminate.
•
Assemble the legs using the holes in the leg pads. Tighten nuts with a 1/2" wrench.
For Installing
Optional
Commercial Duty
3½" x 5½"
Legs
•
Carefully lay the table upside
down on a cushioned surface
(carpeting, blanket, etc.) to
prevent damaging the
cabinet laminate.
•
Viewing the table from either
long side (the sides with rod
holes), install a left leg
(coded "L") on the left hand
side of the table by inserting
the leg's threaded studs into
and through the mounting
pad holes. Then secure with
a flat washer/split-lock
washer/ hex nut (see
drawing). Install a right leg
(coded "R") in the same
manner on the other end of
the same long side.
•
Move to the other long side
of the table and repeat the
process.
2
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
