ShelterLogic MAX AP 23545 Assembly Manual Download Page 10

05_23545_D1

Page 10

Grommet Panels for Bungees

Grommet

Panel

10066

802200

5. PLACE COVER AND SECURE TO CANOPY FRAME

A. 

Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails.

B. 

Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees  

    

     

(10066) 

to the frame first

Attach remaining bungees.

Re-adjust bungees position along cross pole as needed to ensure a tight and even fit of the cover to the frame.

Secure Bungee Around Plastic Ball

Grommet Panels for Bungees

Grommet Panel

802200

Insert Bungee Cord Through Grommet Hole

6. TIGHTEN THE COVER WITH TWIST TITE

A. 

Wrap the cord with plastic ball and "S" hook at the corners of the cover  

     around the corner leg poles. Insert "S" hook into the hole of the corner  

     leg poles.

B. 

Twist each leg pole toward the inside of the shelter until the cover  

 

     becomes tight. Twist the leg poles equally to ensure the cover stays   

     aligned during tightening.

Twist-Tite

 Tighten Cover

13105

10072

13101

Summary of Contents for MAX AP 23545











Reviews: