background image

05_70641_B2

Page 2

9/23/11 70641

Risk of fire. 

DO NOT

 smoke or use open flame devices (including grills, fire pits, deep fryers, smokers or 

lanterns) in or around the shelter. DO NOT store flammable liquids (gasoline, kerosene, propane, etc.) in 

or around your greenhouse. Do not expose top or sides of the shelter to open fire or other flame source. 

WARNING:

PROPER ANCHORING OF THE FRAME IS THE RESPONSIBILITY OF THE CONSUMER.

 

ShelterLogic

®

 

Corp.

  

is not responsible for damage to the unit or the contents from acts of nature. Any shelter that is not anchored 

securely has the potential to fly away causing damage, and is not covered under the warranty. Periodically check the anchors to ensure 

stability of shelter. 

ShelterLogic

®

 

Corp.

 cannot be responsible for any shelter that blows away. 

NOTE: Your greenhouse’s cover can be 

quickly removed and stored prior to severe weather conditions

. If strong winds or severe weather is forecasted in your area, we

recommend removal of cover. 

PROPER ANCHORING AND INSTALLATION OF FRAME:

Covered by U.S. Patents and patents pending: 6,871,614; 6,994,099; 7,296,584; D 430,306; D 415,571; D 414,564; D 409,310; D 415,572

A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can accelerate deterioration of cover 

fabric. Immediately remove any accumulated snow or ice from the roof structure with a broom, mop or other soft-sided instrument. 

Use extreme caution when removing snow from cover- always remove from outside the structure. DO NOT use hard-edged tools or 

instruments like rakes or shovels to remove snow. This could result in punctures to the cover. DO NOT use bleach or harsh abrasive 

products to clean the fabric cover. Cover is easily cleaned with mild soap and water. 

CARE AND CLEANING:

ATTENTION:

This greenhouse product is manufactured with quality materials. It is designed to fit the 

ShelterLogic

®

 

Corp.

 custom fabric cover 

included. 

ShelterLogic

®

 

Corp.

 Shelters offer storage and protection from damage caused by sun, light rain, tree sap, animal - bird 

excrement and light snow. Please anchor this 

ShelterLogic

®

 

Corp. 

structure properly. See manual for more anchoring details. Proper 

anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer. Please read and understand the 

installation detail, warnings and cautions prior to beginning installation. If you have any questions call the customer service number 

listed below. Please refer to the warranty card inside this package.

Prior to installation, consult with all local municipal codes regarding installation of temporary shelters. 

Choose the location of your shelter carefully. 

DANGER: Keep away from electrical wires. 

Check for 

overhead utility lines, tree branches or other structures. Check for underground pipes or wires before 

you dig. DO NOT install near roof lines or other structures that could shed snow, ice or excessive run 

off onto your shelter. DO NOT hang objects from the roof or support cables. 

DANGER:

CAUTION:

Use 

CAUTION

 when erecting the frame. Use safety goggles during installation. Secure and bolt together

overhead poles during assembly. Beware of pole ends. 

REPLACEMENT PARTS, ASSEMBLY, SPECIAL ORDERS:

Genuine 

ShelterLogic

®

 

Corp.

 replacement parts and accessories are available from the factory, including anchoring kits for nearly any 

application, replacement covers, wall and enclosure kits, vent and light kits, frame parts, zippered doors and other accessories. All 

items are shipped factory direct to your door. 

This greenhouse carries a full limited warranty against defects in workmanship. 

ShelterLogic

®

 

Corp.

 warrants to the Original Purchaser 

that if properly used and installed, the product and all associated parts, are free from manufacturer’s defects for a period of:

 

1 YEAR FOR COVER FABRIC, END PANELS AND FRAMEWORK.

 

Warranty period is determined by date of shipment from 

ShelterLogic

®

 

Corp.

 for factory direct purchases or date of purchase from an authorized 

reseller, (please save a copy of your purchase receipt). If this product or any associated parts are found to be defective or missing at the time of receipt, 

ShelterLogic

®

 

Corp.v

 will repair or replace, at it’s option, the defective parts at no charge to the original purchaser. Replacement parts or repaired 

parts shall be covered for the remainder of the Original Limited Warranty Period. All shipping costs will be the responsibility of the customer. Parts and 

replacements will be sent C.O.D. You must save the original packaging materials for shipment back. If you purchased from a local dealer, all claims 

must have a copy of original receipt.   After purchase, please fill out and return warranty card for product registration. Please see warranty card for more 

details.

WARRANTY:

QUESTIONS - CLAIMS - SPECIAL ORDERS?    CALL OUR CUSTOMER SERVICE HOTLINE: 

U.S. CUSTOMER SERVICE: 1-800-524-9970   INTERNATIONAL CUSTOMER SERVICE: 001-860-945-6442   CANADA CUSTOMER SERVICE: 1-800-559-6175  

HOURS OF OPERATION: MON-FRI 8:30AM-8:00PM EST, SAT-SUN 8:30AM-5:00PM EST.

Summary of Contents for GrowIT 62681





















Reviews: