Assembly Instructions
14 X 32 Party Tent Style
V1.0 14 X 32 Size
Do NOT Return Unit to Store or Dealer. For all Questions or Shortages please call MDM Products LLC directly.
For Customer Service 800-447-7079 or 203-380-2703 8 AM – 5 PM EST
Door Hold Ups
All ShelterKing doors are manufactured with a pocket on
the bottom edge along the width axis. A ½” plastic or
metal EMT tubing can be inserted into the pocket and
trimmed to fit. Four(4) Bungee Cords (#13) are provided
to be used as Door Hold Up straps.
Bungee Hold Ups support End Panel Fabric in Up
Position
PROPER CARE IN USE
Think Safety First
Keep the exit(s) clear & free from obstruction to prevent
accidental damage to occupants and the party tent in an
emergency.
To help keep the doors closed it may be necessary to
cross over the stake points at the base of zippers. Avoid
walking on the zippers and keep them free from dirt, as
this will maintain their smooth operation. Should the
zippers become difficult to operate, do not force them.
Adjust the stakes/guying of the tent to ease the pressure
on the zippers and lubricate with a silicon or similar
lubricant to maintain their smooth operation.
Periodically check each stake point or securing straps
and re-adjust as necessary, especially during/after windy
or stormy weather.
FIRE WARNING
A Fire Retardant treatment has been applied to the
fabric of this tent that will significantly reduce the rate of
flame spread, but the tent is still flammable.
•
Keep all open fires, barbecues, or heaters at least 20
feet away from all tent fabrics.
•
Keep all open flames and heat sources well away from
all tent fabrics.
•
Do not refill stoves or change fuel cartridges inside or
near to the tent.
•
Never leave heating, lighting or cooking appliances
unattended in the vicinity of the tent.
STORAGE, MAINTENANCE, & CARE
NEVER store the tent unless it is completely dry. Storing
when damp allows the formation of mold and mildew,
which will rot natural fibers & damages the waterproof
coating to the fabric and leaves indelible stains. Poles
and fitments, including tent pegs, should be cleaned,
dried and stored separately from the main tent parts.
These poles may be given a light coating of petroleum
jelly to help prevent corrosion.
Light soiling may be removed either by the gentle use of
a soft brush or using a soft, dampened cloth and mild
detergents. Remove dirt from the fabric by gently
brushing when dry. Never use strong detergents, bleach
or similar cleaning products or wash in a washing
machine, as this will damage the fabric of the tent. Store
in a dry, well-aired place, any damage as a result of
incorrect storage will not be covered by the warranty.
Regularly the party tent should be completely inspected
internally and externally to make certain the unit remains
properly installed and secured.
Stakes/Guy Ropes should be checked regularly. Guy
ropes and stakes connection to frame members should
be maintained tight and depth of anchors should be
checked to be certain they remain deeply and firmly set.
Customer Service or Installation Assistance
Please call your ShelterKing Dealer or MDM Products
LLC at 800-665-4737 or 203-380-2713 if there are
questions about the installation of the unit in any way.
Care and attention to a proper installation will add many
years of life and function to your ShelterKing Party Tent
unit.
