Shelly DUO CW User Manual Download Page 2

Frequency

2400 – 2500 MHz;

Operational range
(depending on
local
construction)

up to 30 m outdoors

up to 15 m indoors

Dimensions

60x122

mm

50x73 mm

Electrical

consumption

< 1 W

Technical Information

• Control through WiFi from a mobile phone, tablet, PC, automation  system or any
other device supporting HTTP and/or UDP protocol
• Microprocessor management
• Controlled elements: multiple LED diods
• Shelly may be controlled by an external switch

CAUTION!

Danger of electrocution. Plugging the device to the power grid has to be

performed with caution.

CAUTION!

Do not allow children to play with the device. Keep the devices for

remote control of Shelly (mobile phones,  tablets, PCs) away from children.

CAUTION!

Please handle it with care! The Shelly

®

DUO is  FRAGILE!

Introduction to Shelly

Shelly

®

is a family of innovative Devices, which allow remote  control of electric

appliances through mobile phone, PC or  home automation systems. Shelly

®

uses

WiFi to connect to  the devices controlling it. They can be in the same WiFi network
or they can use remote access (through the Internet). Shelly

®

may work standalone,

without being managed by a  home automation controller, in the local WiFi network,
as well  as through a cloud service, from everywhere the User has  Internet access.
Shelly

®

has an integrated web server, through which the User  may adjust, control and

monitor the Device. Shelly

®

has two  WiFi modes - Access Point (AP) and Client

mode (CM). To  operate in Client Mode, a WiFi router must be located within  the
range of the Device. Shelly

®

devices can communicate directly with other WiFi

devices through HTTP protocol. An API can be provided by the Manufacturer. Shelly

®

devices may be available for monitor and control even if the User is  outside the
range of the local WiFi network, as long as the  WiFi router is connected to the
Internet. The cloud function  could be used, which is activated through the web
server of  the Device or through the settings in the Shelly Cloud mobile  application.
The User can register and access Shelly Cloud, using either  Android or iOS mobile
applications, or any internet browser  and the web site:

https://my.Shelly.cloud/.

Installation Instructions

CAUTION!

Danger of electrocution. Before installing the  Device into the light socket

please check if it has been powered off.

Summary of Contents for DUO CW















Reviews: