*WARNING
Use “BOOST” with extreme care. Clamps must be tightly connected to the correct polarities
of the vehicle’s battery before pressing boost button. Spark proof and other safety protections will be
disabled after pressing boost button. This mode generates very high current. Sparks will generate when
clamps touch or are connected to each other. It may cause damage to the product and the vehicle’s
electrical system if not used properly. Seek professional assistance if you are not sure about using this mode.
Solutions
Jump start the vehicle.
Make sure the clamps are securely connected to the correct polarities of the vehicle’s battery.
Press “BOOST” on the jumper cable. Solid green LED light will turn on. Jump start the vehicle.
*See warning below.
Disconnect the jump starter and jumper cable from the vehicle. The vehicle’s battery voltage is
higher than applicable. This product is suitable for 12V battery only.
Disconnect the jump starter and jumper cable from the vehicle. Check and make sure the vehicle
starter is not stuck. Wait 30 seconds. Follow jump starting vehicle instructions to jump start the
vehicle.
Disconnect the clamps from the vehicle’s battery. Unplug the jumper cable from the jump
starter. Let the jump starter cool down by putting it in a cool and ventilated place.
Charge the jump starter.
Do not jump start more than 4 times. Disconnect the clamps from the vehicle’s battery.
Unplug the jumper cable from the jump starter. Consult a mechanic.
Connect jumper cable to the jump starter before connecting the clamps to the vehicle battery.
Disconnect the clamps from the vehicle’s battery. Unplug the jumper cable from
the jump starter. Follow jump starting vehicle instructions to jump start the vehicle.
Make sure the clamps are securely connected to the correct polarities of the vehicle’s battery
Make sure the clamps are securely connected to the correct polarities of the vehicle’s battery
