IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH
USE AND EVERY THREE MONTHS, OR WHEN THE BATTERY LEVEL
FALLS BELOW 50%, TO PROLONG THE INTERNAL BATTERY LIFE.
1. Connect the DC Terminal of the
included adaptor to the input port of the
jump starter.
2. Connect the input terminal of the
adaptor to an external AC outlet.
3. The LED battery level indicators start
flashing. (Please refer to the following
table for charging status)
4. When charging is completed,
the LED indicator will stop flashing.
5. Disconnect the adaptor from the outlet
and remove the charging cable from
the jump starter.
Charging the Jump Starter
Battery Level Indicator Chart
Operating Instructions
The jump starter is intended to jump start vehicle with gasoline/diesel
engine using a 12V battery.
Jump Starting Vehicle
Before connecting to the battery
1
LED Status
(
●
ON O OFF)
100%
fully charged
75% - 100%
50% - 75%
25% - 50%
0% - 25%
Power Status
1. Verify the voltage of the battery. The information
can be found in the vehicle's owner's manual.
2. Make sure the power loads such as headlamps,
air-conditioning and radio are turned off.
3. Press the switch to check the internal battery
level to ensure that there is sufficient battery
capacity to jump start a vehicle. (Refer to the
following table for more information)
