SharpEye 20/20MPI, User And Maintenance Manual

Page: 63 / 64

TM 20/20MPI, Rev (5) April 2017
Battery Replacement 63
6
Connect the battery to the charger. Verify that the charger is the one
supplied with the flame simulator Model FRIWO MPP15 with maximum
charging voltage of 16.8V (4.2V x 4), and with a maximum current of
700mA.
7
Charge for a maximum of 2–3 hours, until the green LED on the charger
turns on.
8
Disconnect the charger.
9
Insert the battery into the flame simulator.
10
Screw on the locking disc (Item 3).
11
Screw on the back cover (Item 4).
12
Lock the back cover with the locking screw.
B.7 Battery Replacement
➣ To replace the battery:
1
Place the flame simulator on a table in a safe area, not exceeding
104°F/40°C.
2
Release the locking screw.
3
Unscrew the battery back cover (Item 4) counterclockwise.
4
Unscrew the locking disc (Item 3) clockwise.
5
Pull out the battery from the flame simulator.
6
Insert the new battery pack in the simulator housing. Use only
SPECTREX battery pack, P/N 380004.
7
Screw on the locking disc (Item 3).
8
Screw on the back cover (Item 4).
9
Lock the back cover with the locking screw.
Note : For more information refer to TM 380002 .
www.acornfiresecurity.com
www.acornfiresecurity.com