Ride The Waves
Ride The Waves
Industrial Grade Ultrasonic Sewing Machine
Industrial Grade Ultrasonic Sewing Machine
www.sharpertek.com
Sales: 877.234.6938
Overview
The SharperTek ultrasonic sewing machine joins plastic and rubber film products. Its operation is
simple, resembling a normal sewing machine's operation.
Highly productive and versatile, the machine can join and slit in one process. The bonded joint produced
is attractive, strong and durable.
The machine joins materials using ultrasonic technology. A rotating work head die, located in the upper
armature of the machine, is lowered to the table's work surface and pinches rubber or plastic films
between itself and an ultrasonic mould located in the table top. The ultrasonic mould transmits ultrasonic
energy, and the rotating work head die feeds the pinched films through the joining process creating a
permanent, bonded joint.
Power up and configure the machine using each of two switch panel interfaces: one located on the table
top, the other located below in the machines frame. The table top switch panel interface configures the
machines feed operation. The frame mounted switch panel interface configures the machines
ultrasonics.
You can adjust the rotating work head die set height by rotating the large nut located on top of the
machines armature.
You can tune the ultrasonic frequency by rotating a recessed rheostat located on the frame mounted
switch panel interface.
You can alter the machines joining pattern by replacing the rotating work head die located in the
armature of the machine.
A
B
C
D
E
F
G
H
I
A - Table Top Switch Panel Interface
B - Frame Mounted Switch Panel Interface
C - Main Feed Pedal
D - Rotating Work Head Lower Pedal
E - Rotating Work Head Die
F - Ultrasonic Mould
G - Rotating Work Head Set Height Adjust
H - Rotating Work Head Manual Feed
I - Ultrasonic Booster and Power Source