B.
CONTENTS
• SoundHaven
®
ANC headphones
• Carrying case
• 3.5mm cable
• USB-C charging cable
GETTING STARTED
CHARGING
1. Connect the USB-C charging cable to a USB power adapter
(not included).
2. Connect the other end of the USB-C charging cable to the
USB-C port on the right side of the headphones. The LED will
be orange when charging and green when fully charged.
ADJUSTING
• Adjust the headphones by carefully pulling or pushing the
earcups in or out from the headband until you find the fit that
feels most comfortable to you.
HOW TO USE
POWER
1. To power on the headphones, press and hold the power
button for 5 seconds. The LED will glow blue and a power
notification will play.
2. To turn off the headphones, press and hold the power button
for 5 seconds. The LED will turn white and then the
headphones will turn off.
WIRELESS PAIRING
1. Power on the headphones to automatically enter pairing
mode the first time or automatically reconnect to the last
paired device.
2. Enable Bluetooth
®
functionality on your compatible device
and select “SOUNDHAVEN ANC” from the menu. A
connected notificationon will play when the headphones
have been successfully paired.
3. To manually disconnect, turn off Bluetooth on your onnected
device or remove the headphones from the device list.
4. To connect to a new device, turn off the headphones and
then hold the power button for 8 seconds.
ACTIVE NOISE CANCELING
1. To turn ON or OFF ANC (Active Noise Canceling), single Tap
the touch panel on the left side of the headphone.
2. When ANC is ON, double tap the touch panel on the left side
of the headphone to cycle through the 4 ANC mode.
• Mode 1: Blocks noise expected in airplane cabins
• Mode 2: Blocks noise with bass and low frequency
• Mode 3: Blocks noise in outdoor and windy environments
• Mode 4: Blocks noise associated with offices and restaurants
3. To turn on or turn off transparency mode, press and hold the
control panel for 2 seconds.
• Transparency Mode: Allows you to hear others speak
without needing to remove your headphones.
OTHER FUNCTIONS
1. To activate your voice assistant, press the voice assistant
button on the left side of the headphones.
2. For wired audio, plug the 3.5mm cable (included) into the
3.5mm port on the headphones.
STORAGE
1. Always store the headphones in the included case when not
in use.
2. To fit the headphones into the case, adjust the headband to
the smallest size and swivel the earcups flat.
Voice Assistant
Call button
Touch Control
3.5mm Port
Bluetooth status LED
Charging LED
Power On/Off USB-C Port
CALL FUNCTIONS
1. To answer an incoming call, press the call button on the right
side of the headphones (Figure A).
2. To cancel a call, press the call button again.
3. To reject a call, press and hold the call button for 1 second.
4. To mute the call quickly double tap the touch control on the
right side of headphones.
5. To end the call, press the call button.
6. To redial the last number called, press the call button twice.
MUSIC FUNCTIONS
1. To play or pause music, tap the touch control on the right
side of the headphones (Figure B).
2. To increase the volume, slide your finger around the touch
control clockwise (Figure C).
3. To decrease the volume, slide your finger around the touch
control counterclockwise (Figure D).
D.
C.
A.