Sharper Image SI-428, Owner'S Manual

Page: 9 / 17

9 English
FILLING RESERVOIR
1. Place Handheld Fabric Steamer on a flat, level surface.
2. Make sure power cord is unplugged from electrical outlet.
3. Remove Water Reservoir Cap by turning clockwise.
4. Carefully fill Reservoir with water from a faucet, bottle or cup. Use Reservoir
Level Window to gauge water level, stopping when it reaches the MAX mark.
WARNING: MAX mark on Reservoir Level Window represents the unit’s maximum
usable water capacity (4.0 oz. / 118 ml.). Exceeding this amount will result in water
spitting from Steam Nozzle.
NOTE: In order to minimize potential mineral build-up and prolong the life of your
Handheld Fabric Steamer, distilled or de-mineralized water is recommended
when filling Reservoir.
5. Replace Water Reservoir Cap by turning counter clockwise and until the arrows
are aligned.
CAUTION: If unit has been in use, allow Reservoir to cool (5 minutes for
minimum cooling before removing Water Reservoir Cap and adding water).
CAUTION: IF UNIT TIPS OVER WHILE TURNED ON AND PRODUCING STEAM, IT
WILL CONTINUE TO PRODUCE STEAM. USE CAUTION WHEN PICKING UNIT UP.