Sharper Image PURIFY 3, Owner'S Manual

Page: 17 / 20

17 English
POSSIBLE CAUSE AND SOLUTION PROBLEM
Unit is not plugged in. Plug power cord into electrical outlet.
Household circuit breaker/ground fault circuit interrupter
has tripped or blown fuse. Reset circuit breaker/ground fault
circuit interrupter, or replace fuse. For assistance, contact
licensed electrician.
Unit is damaged or in need of repair. Cease usage and
unplug. Contact Consumer Service for assistance.
Front Panel may not be properly installed. Remove and
reinstall the Front Panel to assure proper placement.
Unit set to a low speed setting. Adjust to a higher speed
setting.
Debris build-up on filter. Check and replace Filters.
Airflow is blocked. Remove obstruction.
Replacment filter is wrapped in polybag. Check filters to
ensure all plastic packaging is removed before use.
The unit fails to
power on.
Airflow is weak or
slow.
TROUBLESHOOTING