8
9
starting on High Breeze for 30 minutes, then shifting to Medium Breeze for
another 30 minutes and then shifting to Low Breeze. If the timer is set, then
the fan will automatically shut off at the selected time period. If the timer is not
on, then the fan will continue running in the Low Breeze mode until the fan is
turned off by pressing
ON/OFF
(
) on the touch screen. While in this mode
SLEEP will show on the screen.
3. Oscillation
• To activate the oscillation, press
OSCILLATE
(
) on the touch screen. The
fan will oscillate 90 degrees side to side. The oscillation symbol (
) will light
up when the fan is oscillating.
• To turn off the oscillation, press
OSCILLATE
(
). The oscillation
symbol (
) will no longer be seen on the screen.
4. Operating the Three Fans
The Flat Panel Tower Fan offers you the ability to operate the fans individually or all
three together. Press
FANS
(
) to switch between fans and make your desired
selection. Press once and all three fans will run. Press again, Fan 1 will run and
the other two will stop. Press again, Fan 2 will run and the other fans will stop.
Press again, Fan 3 will run and the other fans will stop. Press again and all three
fans will run. The appropriate
FAN
number will light up on the screen to indicate
which fans are running.
5. Timer
There are four possible timer settings: 30 minutes, 1 (one) hour, 2 (two) hours and
8 (eight) hours. To activate the timer and select a time setting, press
TIMER
(
) on the screen. Each time the
TIMER
(
) function is pressed it
will switch between settings in a repeating cycle as follows: 30 minutes, 1 hour,
2 hours, 8 hours, OFF. Press again and the cycle begins again. The selection
will light up on the screen matching the time period. When the timer is OFF no
selections will be lit.
Using the Remote Control
• Check that neither the appliance nor the power cable has been damaged
when first using.
• Place the fan on a firm level surface.
• Plug the fan into a standard AC outlet. The fan will beep twice to confirm
connection.
• Press
ON/OFF
(
) on the screen.
• NOTE: every time a command is pressed on the touch screen the fan will emit
a small beep and the appropriate symbol will light up confirming the function.
1. On/Off and Speed settings
• Turn the fan ON by pressing the
ON/OFF
(
) symbol on the screen. The first
time it is turned on it will be operating as follows: LOW speed, NORMAL wind
mode, oscillation OFF and with all three fans running.
• If the unit has been used already, it will work as the settings the last time it was
used, except for the timer and sleeping mode functions.
• Once the fan is ON, press
SPEED
(
) to select speed settings. The speeds
cycle as follows: Low
Medium
High. Each time
SPEED
(
) is pressed.
The cycle repeats starting back at LOW.
• To turn the fan OFF, simply press
ON/OFF
(
).
2. Wind Modes
• To select or change wind modes press
MODE
(
) When first turned on
the fan starts in NATURAL mode. Press
MODE
once to change to BREEZE.
Press again to select SLEEP. Press again to return to NATURAL. The modes
repeatedly cycle as: NORMAL
BREEZE
SLEEP.
•
NORMAL mode:
In this mode, the fans operate in a standard continuous
pattern. The words BREEZE and SLEEP will not be lit on the screen.
•
BREEZE mode:
In this mode, the fan will alternate speeds from High to
Medium to Low, repeating regularly and automatically, this mode simulates a
natural breeze found outdoors. On the touch screen BREEZE will be lit.
•
SLEEP mode:
In this mode the fan will go into the BREEZE wind pattern,