Sharper Image AIRBAR AXIS 12, Owner'S Manual, Page: 12 / 15

12 English
POSSIBLE CAUSE AND SOLUTION PROBLEM
TROUBLESHOOTING
The unit fails to
power on.
Unit is not plugged in. Plug Power Cord into USB outlet or AC
adapter.
If using the AC adapter, check that it is plugged into an AC
outlet.
Ensure unit fan speed setting is selected.
Unit is damaged or in need of repair. Cease usage and unplug.
Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet for AC
adapter or contact a qualified electrician.
Airflow is weak
or slow.
Ensure unit is set to highest setting for maximum air circulation.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
GFCI has tripped. Under certain conditions, it is possible for a reset GFCI (Ground
Fault Circuit Interrupter) outlet to trip when the user is changing
speeds on a fan. In this event, change to an outlet that is not
connected to a GFCI device. It could also indicate a weak or
defective GFCI outlet. Contact a qualified electrician to check
the GFCI outlet.