-5-
LEARNING TO DRIVE
STEP 1:
Place the Hoverboard on a flat surface
STEP 2:
To turn on your Hoverboard, press the Power Button
STEP 3:
Put one foot on the pad. This will trigger the pedal switch and turn on the indicator light.
The system will automatically enter self-balancing mode. Next, place your other foot on the
other pad.
STEP 4:
After standing up successfully, keep your balance and center of gravity stable while the
Hoverboard is in a stationary state. Make small forward or backward movements using your
entire body.
DO NOT MAKE ANY SUDDEN MOVEMENTS.
DO NOT JUMP
onto your Hoverboard. This will cause severe damage. Carefully step onto the
device only.
STEP 5:
To turn left or right, lean your body in the direction you wish to go. Positioning your right
foot forward will turn the vehicle LEFT. Positioning your left foot forward will turn the vehicle
RIGHT.
STEP 6:
Keep the Hoverboard balanced. Take one foot off the mat quickly, then remove the other
foot.
• Do not turn sharply
• Do not turn at high speeds
• Do not drive quickly on slopes
• Do not turn quickly on slopes
SAFE MODE
During operation, if there is a system error, the Hoverboard will prompt drivers in different ways.
An alarm indicator lights up, a buzzer sounds intermittently, and the system will not enter self-
balancing mode in these circumstances:
• If you get on the Hoverboard while the platform is tilted forwards or backwards
• If the battery voltage is too low
• If the Hoverboard is in charging mode
• If you are driving too fast
• If the battery has a short
• If the motor temperature is too high
