-2-
1. FILLING THE TANK
• Remove the
rubber cap
• Fill the aquarium
to the top with
distilled water
2. PLUGGING IN THE DEVICE
• Connect A end to the
base
• Plug B end into an AC
outlet
• Turn on the switch
3. ADDING THE LIFELIKE JELLYFISH
• Add 2-3 drops of liquid
dish washing soap
to the water in the
aquarium
• Place the jellyfish upside-
down in the filled aquarium
• Try to avoid air bubbles. If
necessary, use a straw or
a stick to break up any air
bubbles
• Note:
Allow the aquarium
run for at least 30 seconds
before adding the jellyfish
• Replace the rubber
plug and the plastic
cap
• Press the
ON
button
to activate the lamp
in automatic color-
changing mode
• Press the
SELECT
button
to toggle through the 5
different colors
IMPORTANT
This unit will turn off automatically after 4 hours of operation. Please leave the unit OFF for 1 hour
before reactivating the aquarium.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 (877) 210-3449. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
• Handle the aquarium with care
• Always place the aquarium on a
flat surface
• Use a soft cloth to dry the outside
of the aquarium if needed
4. MAINTENANCE
• Change the water occasionally
if it appears dirty
