USING THE TRUE NIGHT
VISION BINOCULARS
Turn the True Night Vision Binoculars on
by
pressing down on the ON button for a short
period.
Pick an infrared power level
by pressing the
IR button to illuminate at night. There are
3 brightness settings. A higher setting will
provide a brighter picture, but will deplete the
batteries quicker.
Focus the picture
by turning the focus wheel
clockwise or counter-clockwise.
You can use digital zoom
to increase the
zoom ratio more by pressing the Zoom
button to magnify the picture from 1.0x-
>1.07->1.14…to 2.0x then go back to 1x
magnification.
Adjust the LCD brightness level
by pressing
down on the INTEN button. Operating True
Night Vision Binoculars at night may have LCD
brightness issues — use the intensity button
to adjust LCD brightness accordingly.
Press the Mode button to switch modes
—
the four modes are: Photo, Video, Gallery
and Setting. These are explained in the next
sections.
DISPLAY INFORMATION
1. No. of photos taken
2. IR level Indication
3. Photo/Video mode icon
4. Battery level indicator
5. Zoom Ratio indication
6. SD card insert indication
- 3 -
TAKING PICTURES AND VIDEOS
To take a picture,
go to Photo mode (this is
the default mode when the True Night Vision
Binoculars are switched on). A camera icon
shows at the bottom of the screen. To take a
photo, press the OK button.
To record a video,
go to Video mode. A small
video icon will appear at the bottom of the
screen. To start recording, press the OK
button. To stop recording, press the OK button
again. Video will save automatically onto the
Micro SD memory card.
