- 2 -
CORDLESS TRIMMING
1. Unplug Trimmer from outlet and remove
cord.
2. Slide ON/OFF switch ON to begin trimming.
3. When finished, turn Trimmer OFF.
TRIMMING
• Use this Trimmer for its intended household
use as described in this manual.
• Always comb the beard and/or moustache
with a fine comb before you start trimming.
• If you are trimming for the first time, be
careful. Do not move the Trimmer too fast.
Make smooth and gentle movements.
TRIMMING WITH YOUR BEARD
Trimming Comb
(Note: Beard Trimming Comb
must be on Trimmer to use the Zoom Lock.)
1. Turn the Zoom Lock to the desired
trimming length setting (See table). The
setting is indicated in the center of the
adjustment ring (Fig. 3). If you are trimming
for the first time, start by using the comb
at the maximum trimming length setting
(#10) to prevent accidentally trimming
hairs too short. As you become familiar with
the settings, adjust Zoom Lock to desired
trimming length. Zoom Lock will “click” into
position at each setting.
2. Switch the Trimmer ON.
3. To trim in the most effective way, move
the Trimmer against the direction of hair
growth. Make sure the surface of the comb
always stays in contact with the skin
(Fig. 4).
4. If cut hairs have accumulated in the comb
turn Trimmer off, remove the comb and
shake the hair out of comb (Fig. 5). The
selected trimming length setting will not
change when you do this.
Trimming without the Beard Trimming comb
1. Be certain the Trimmer is in the OFF
position.
Setting
Hair length after trimming
-
0.5 mm
1
1 mm
-
1.5 mm
2 2
mm
- 2.5
mm
3 3
mm
- 3.5
mm
4 4
mm
- 4.5
mm
5 5
mm
- 5.5
mm
6 6
mm
- 6.5
mm
7 7
mm
- 7.5
mm
8 8
mm
-
8.5 mm
9 9
mm
- 9.5
mm
10
10
mm
Trimming for ‘Stubble’ Look
5. Be certain Beard Trimmer Comb is on
Trimmer and use setting 1 (3/64in/1mm) to
result in a ‘stubble’ look (Fig. 6).
Trimming without the Beard Trimming comb
Remove comb if you are:
• Defining hair lines
• Trimming nape of neck
• Removing single, unwanted hairs
2. Remove the Beard Trimming Comb by pulling
it off the Trimmer (fig.7)
3. Switch the Trimmer ON.
4. Make well-controlled movements. Touch the
hair/skin lightly with the Trimmer (fig.8).
