- 2 -
INTRODUCTION
The Travel UV Sanitizing Wand provides effective protection from germs, viruses, bacteria, dust
mites and mold throughout your home. Used regularly on surfaces throughout your home to
disinfect (in addition to regular cleaning of bedding, floors and other surfaces), it will protect your
home without the use of sprays or harsh chemicals.
FEATURES
• Naturally eliminates germs that cause colds, infections, asthma and allergic reactions
• Destroyed over 99.9% of E. coli in laboratory tests
• Chemical-free
• Odorless
• No harmful residue
• A hypoallergenic way to disinfect kitchen surfaces and utensils, beds, sofas, children’s toys
and more
• Safe and easy to use
• Built-in timer with auto shutoff
• Silent operation
• New Safety Feature: A built-in safety switch will automatically turn the UV-C light off if the
device is turned upward, protecting your eyes from exposure to UV-C light.
WARNING!
Do not expose eyes or skin directly to UV-C light. Keep this device out of the reach of
children at all times.
OPERATING THE TRAVEL UV SANITIZING WAND
Inserting Batteries
• Open the battery cover. Insert 4 AA Alkaline batteries (included) into the battery compartment
and close the cover. The Travel UV Sanitizing Wand is now ready to use. (Fig. 1)
Turning On and Off
• To turn the device on, press and hold the Power button for 3 seconds. The LED indicator will
begin flashing. Once the flashing has stopped, the Travel UV Sanitizing Wand is ready for use.
(Fig. 2)
• To turn the device off, press the Power button once while the Travel UV Sanitizing Wand is
operating. (Fig. 3)
Low Voltage Warning
• When battery voltage is down to 3.8V, the Travel UV Sanitizing Wand will start beeping for
about 10 seconds. If no battery replacement is made after the beep warning, the unit will
automatically shut off. (The germicidal lamp and LED indicator light will turn off.)
Safety Switch
• The Travel UV Sanitizing Wand contains a safety switch that protects users from accidental
direct contact with the UV-C light. When the UV-C lamp is turned to the upright position (bulb
facing up) the switch will automatically cut off the UV-C light. When the UV-C lamp is pointing
downwards, it will resume lighting. (Fig. 4)
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
